A catio, reptile habitat, rabbit run and chicken enclosure are not four sizes of one generic cage. Bật Mạnh is developing custom 304 stainless steel enclosure directions around the identified animal, climate, escape risk, predator risk, floor, ventilation, cleaning and installation route. Natural-finish and powder-coated stainless options can both be discussed.
This is not a catalogue of standard products already ready to ship. It identifies enclosure types that fit Bật Mạnh's stainless steel, mesh, acrylic and modular-fabrication capabilities. A project proceeds only after the species-specific requirements and local responsibilities have been reviewed.
Why we are developing beyond bird cages
International companion-animal ownership is broader than birds and parrots. The American Pet Products Association reports that 53 million US households owned a cat in 2025. Its 2025 fish and reptile report records six million US reptile-owning households, with turtles or tortoises, lizards and snakes forming distinct ownership groups rather than one interchangeable market.
UK Pet Food's 2026 population data includes cats, rabbits, guinea pigs, snakes, tortoises and turtles, domestic fowl and indoor birds. Animal Medicines Australia's 2025 national survey also records reptiles and small mammals alongside the larger cat, dog and bird populations.
Those figures show commercial opportunity, but population alone does not define a product. Bật Mạnh will prioritise enclosure directions that match its fabrication strengths and can be specified responsibly.
Enclosure directions that fit the workshop differently
| Direction | Potential Bật Mạnh format | Critical boundary |
|---|---|---|
| Catios and secure cat runs | Modular 304 frames, mesh panels, human access door, shelves and weather sections for a defined balcony, garden or window route. | The completed system must be escape-resistant, structurally anchored and safe at every roof, floor, wall and house connection. |
| Selected reptile enclosures | Tall ventilated frames with specified solid/clear panels for suitable arboreal species, or secure outdoor ground pens for suitable tortoises after specialist review. | Open mesh is not a universal reptile habitat. Heat retention, humidity, substrate, lighting and ventilation are species-specific. |
| Rabbit and guinea-pig shelter/run systems | Large modular predator-resistant runs joined to a dry shelter, with solid resting surfaces and practical human cleaning access. | A small raised wire cage is not an acceptable substitute for usable floor area, shelter, exercise and species companionship. |
| Backyard chicken runs | Roofed or partially covered modular runs, secure service doors and interfaces to a locally suitable coop. | The run does not replace a weatherproof sleeping and nesting area, ventilation, shade or local poultry rules. |
| Ferret and small-rodent enclosures | Possible later-stage multi-level frames with removable solid trays, very carefully specified openings and enrichment interfaces. | Escape risk, foot safety, ventilation, heat and species-specific opening size require separate prototypes—not a resized bird cage. |
1. Catios are the strongest first international direction
A catio gives a cat controlled access to fresh air and outdoor stimulation while reducing roaming and escape risk. The Cats Protection indoor-cat guidance suggests an enclosed garden or catio as a secure way to provide outdoor access. RSPCA Australia likewise discusses escape-proof outdoor containment as one home option.
This direction fits made-to-measure modular fabrication well. A quotation can divide the project into framed mesh panels, roof modules, a human door, shelves or ramps, wall and floor interfaces, and an optional connection tunnel. The customer must provide accurate photographs and dimensions of the building, window, balcony or garden zone.
Key decisions include load path and anchoring, mesh opening and wire strength, double-door or secondary escape control where needed, sharp-edge protection, shelf size and grip, rain cover, shade, drainage, cleaning access and the way the cat enters from the home. A freestanding garden catio and a balcony enclosure require different structural and local-building reviews.
Continue with the custom stainless steel catio planning guide for window, balcony and garden formats, enrichment, anchoring, modular delivery and a first-enquiry checklist.
2. Reptile work must be habitat-specific
“Reptile cage” is too broad for safe fabrication. A terrestrial leopard gecko, an arboreal crested gecko, a snake and a tortoise do not need the same enclosure. The RSPCA reptile-home guidance advises setting up and stabilising the habitat temperatures before the animal enters.
Tall ventilated and outdoor-pen formats
A 304 stainless frame combined with selected mesh, acrylic or glass panels may suit a carefully specified tall habitat. Ground-level modular pens may be explored for appropriate tortoises where digging, predators, weather and shelter are addressed.
Heat-holding vivaria and aquatic systems
Many snakes and terrestrial geckos need secure solid-sided vivaria with controlled heat and humidity. Aquatic turtles need a water system. These should not be replaced by an open stainless mesh cage.
The RSPCA crested-gecko guide calls for a tall, secure and ventilated enclosure and notes the need to retain humidity. Its leopard-gecko guide instead describes a terrestrial, solid, easy-to-clean and ventilated vivarium. That contrast is why Bật Mạnh will request the accepted species name and a qualified husbandry brief before proposing panel ratios or dimensions.
Heating, ultraviolet lighting, electrical protection, thermostat control, humidity, drainage and fire safety must be designed and installed for the exact equipment and destination regulations. The stainless enclosure fabricator should not guess those systems from an animal photograph.
Use the species-first reptile enclosure frame guide to compare tall humid habitats, solid vivaria, snake containment, tortoise ground pens and aquatic systems before requesting metalwork.
3. Rabbits and guinea pigs need floor area, shelter and a run
Small mammals are often sold with enclosures that are convenient to package but too limited for normal movement. The RSPCA rabbit environment guide recommends a living space of at least 3 m × 2 m × 1 m for two medium-sized rabbits and describes a shelter permanently connected to an exercise area. The RSPCA Australia guinea-pig guidance likewise emphasises a solid floor, shelter, exercise area, predator protection and temperature control.
For Bật Mạnh, the relevant product is therefore a modular shelter-and-run system, not a decorative elevated cage with an exposed wire floor. The design brief should cover usable ground area, sheltered dry zone, buried or protected perimeter where appropriate, roof and predator resistance, door size for human cleaning, solid resting surfaces, bedding retention and how animals are separated safely during maintenance.
The rabbit and guinea-pig run guide expands the shelter connection, floor, predator boundary, climate, daily-care and modular-shipping decisions.
4. Backyard poultry can use modular runs
Pet and backyard chickens create demand in the UK, Australia and other markets, but a run is only one part of their housing. RSPCA Australia chicken-housing guidance distinguishes the coop from the outdoor run and addresses space, predators, weather and cleaning. The UK government's laying-hen welfare code also covers cleanable construction, ventilation, floors, weather and predator protection.
A practical export direction is a labelled kit of rigid run panels, roof sections, retained hardware and a secure human door, designed to connect to a separately specified coop or shelter. This reduces shipping bulk compared with a fully assembled structure and allows the destination contractor to prepare the foundation, drainage and anchoring required by the site.
Read the dedicated custom chicken and poultry run guide for flock information, coop interfaces, predators, weather, ground, cleaning, biosecurity and fixed or mobile modules.
304 stainless steel can remain natural or be powder-coated
The frame, mesh, solid panels, trays and fittings should be described component by component. Bật Mạnh can fabricate specified parts in 304 stainless steel with a visible natural finish, or powder-coat the specified stainless structure when the customer prefers colour. Acrylic, glass, timber, seals, wheels, electrical equipment and purchased locks remain separate material items.
Powder coating is not treated as evidence that the underlying material is ordinary steel. Conversely, the phrase “304 stainless” does not prove that every accessory is stainless. The quotation should record both the substrate and finish, then identify animal-accessible surfaces and the care method. Read the natural-finish versus powder-coated 304 guide for the purchasing questions that also apply to custom animal enclosures.
One species-first specification process
- Identify the animal: accepted species name, number, sex or social grouping where relevant, adult size, strength, climbing, digging and chewing behaviour.
- Obtain the husbandry brief: required usable dimensions, floor or substrate, ventilation, temperature, humidity, lighting, shelter and enrichment from an appropriate professional source.
- Record the site: indoor or outdoor location, weather, predators, wall/floor construction, drainage, shade, services and local restrictions.
- Control every opening: mesh aperture, wire diameter, panel joints, doors, locks, feeder ports, floor edge, roof edge and service penetrations.
- Separate material from finish: identify 304 components, natural or powder-coated faces, clear/solid panels and every purchased item.
- Plan daily use: animal transfer, feeding, cleaning reach, waste removal, temporary separation, equipment access and emergency release.
- Choose construction: fixed welded or modular sections based on rigidity, package size, receiving route, local assembly and future relocation.
- Approve responsibilities: define what Bật Mạnh supplies and what a local contractor, electrician, glazier, veterinarian or reptile specialist must provide.
Large animal enclosures should be designed for the route
Catios, runs and outdoor pens are normally too bulky to export as one welded body. Modular panels can reduce the largest carried piece, but every joint becomes part of the escape, predator and structural check. The drawing should label panels, fasteners, supports, door orientation and the sequence of assembly.
Before quotation, send the destination country and postal code, the narrowest gate or doorway, corridor turns, stairs or lift, vehicle access and photographs of the final site. Packed dimensions and weight cannot be assumed from the assembled enclosure. Review the international ordering and packing guide for the commercial workflow that also applies to an enclosure project.
What Bật Mạnh can review now
The workshop can review custom feasibility for catios, selected tall ventilated reptile frames, suitable tortoise pens, rabbit or guinea-pig shelter/run systems and backyard poultry runs. It will not assign a standard product merely because two animals are similar in size. Projects involving controlled heating, high humidity, water containment, structural building work or regulated electrical systems require qualified local input before the enclosure specification is frozen.
For a first review, email nguyenbatmanh@gmail.com with the animal's accepted species name and quantity, professional husbandry requirements, target dimensions, natural or powder-coated finish preference, site photographs and delivery destination. Bật Mạnh will separate confirmed workshop scope from items requiring further design or local installation.
Discuss the animal, habitat and installation site
Send the accepted species, quantity, husbandry brief, target dimensions and site photographs for an early technical review. International transport is not a standard service and remains separate from the enclosure design.