Five-Compartment 304 Stainless Steel Parrot Cage System

Five-compartment stainless steel parrot cage system

This Bật Mạnh reference build separates five birds into five individual 304 stainless steel compartments. Each compartment measures 50 × 50 × 80 cm and has its own pull-out waste tray, heater and switch. The documented build also uses stainless partitions, a clear acrylic back and a barred roof covered by an acrylic sheet.

Confirmed product specifications

The 50 × 50 × 80 cm figure applies to each compartment, not the complete assembled system. Total width, depth, height, support frame, access route and installation clearances must be confirmed for a new order.

Five compartments do not mean one universal parrot size

Approximately 19 mm spacing can be too wide for some smaller parrots, while a 50 × 50 cm floor can be too limited for larger parrots. Each compartment therefore requires a species-specific review of body size, wingspan, tail, beak strength, intended housing period and local welfare guidance. Do not use the compartment count as a substitute for compatibility or space assessment.

Individual trays and solid partitions

Separate trays allow one compartment to be cleaned without removing every tray. Stainless partitions visually and physically separate the bays, but ventilation, lighting, noise and the behaviour of neighbouring birds still need consideration. Tray clearances, handles and floor grates should be checked for safe daily access.

Heating is an optional engineered system

The documented product has a separate heater and switch for each bay. Heating should only be used with a defined temperature plan for the species, age, health and local climate. The heat source, guard, cables, conduit, switch and every electrical connection must remain beyond the bird's reach and must not create a hot surface, chewing point or ventilation problem.

For export, confirm voltage, frequency, plug, earthing, thermostat or control method and the electrical rules at the destination. A qualified person should inspect the installed system locally. The Vietnamese reference wiring must not be assumed compatible with another country's supply.

Clear acrylic back and covered roof

The clear acrylic back and roof cover can help contain debris around this particular installation. Their dimensions, thickness, fixing method and cleaning access should be agreed with the cage. Acrylic must not block the required ventilation, and the bird should not be able to reach rough edges or fasteners.

Installation and international freight

Measure the complete installation area and the route through gates, doors, corridors, stairs and lifts. Multi-compartment systems may need modular construction and on-site assembly. Packaging, freight, import charges, local installation and electrical inspection are separate from the product unless the quotation states otherwise.

Frequently asked questions

Is each compartment 50 × 50 × 80 cm?

Yes. Those are the published width, depth and height of each compartment. The overall assembled dimensions are not published and must be confirmed.

Is the 19 mm gap safe for every parrot?

No. It is the approximate reference gap in this completed build. The bird's head size, age, mobility and beak strength, plus every secondary opening, must be reviewed before ordering.

Is a heater included in every custom version?

Not automatically. The reference product has one heater and switch per compartment. The final quotation must state the heating, guards, controls, voltage and electrical scope.

Why is there no fixed price?

This product is currently marked “Contact for quote” on the shared WooCommerce record. Price depends on the confirmed dimensions, configuration, electrical scope, packaging and delivery.

Compare this system with the 60 × 60 × 150 cm wheeled play-top cage, or review both products in the parrot cage category.